16-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart PoE Switch

• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z　Gigabit Ethernet standard
• 16-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart PoE Switch
• 8-Port support 48VDC power to PoE Powered Device (Port 1 to port 8)
• Each Switching ports support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet) supported
• Auto-MDI / MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x　pause frame flow control (full-duplex)
• High performance Store and Forward architecture, broadcast storm control,　runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
• 4K MAC address table, automatic source address learning and ageing
• 2.75Mb embedded memory for packet buffers
• Remote Web interface for Switch management and setup
• SNMP Trap for alarm notification of events
• Broadcast Storm Control support
• Supports up to 16 / 18 port-based VLAN groups / 32 IEEE 802.1Q VLAN groups / MTU VLAN
• Supports up to 2 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth
• Supports QoS , bandwidth control and MAC address filter / TCP & UDP filter on each port
• Supports port mirroring function and IGMP Snooping v1 / v2
• PoE power Disable/Enable and PoE power consumption monitoring by management interface
• Firmware upgrade through Web interface
• Password setting, IP setting and device description setting through Planet Smart discovery utility
• 19-inch rack mount size
• Internal full-range power supply suitable for worldwide use
• EMI standards complies with FCC, CE class A

24-Port 10/100/1000Mbps Gigabit Ethernet Switch

• Complies with IEEE 802.3, 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet
　standard
• 24 10/100/1000Mbps Gigabit Ethernet ports
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control and
　auto-negotiation
• IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation
• Integrated address look-up engine, support 8K absolute MAC addresses
• 9K Jumbo packet support
• Automatic address learning and address aging
• Supports auto MDI/MDI-X function
• Supports CSMA / CD protocol
• 100-240V AC, 0.6A, 50/60Hz universal Power input
• FCC, CE class A compliant

16-Port Web Smart Gigabit Ethernet Switch w/2 SFP Interfaces

General Features
• Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
• 16 10/100/1000Mbps Gigabit Ethernet ports
• 2-Port SFP (Small Form-factor Pluggable) for 3.3V mini GBIC module, 100Base-FX / 1000Base-SX/LX dual mode
　- Shared with Port-15 and Port-16
• Auto-negotiation and half-duplex / full-duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports
• Each switching port supports auto-negotiation of 10/20Mbps, 100/200Mbps and 1000/2000Mbps
• Auto-MDI/MDI-X detection on each RJ-45 port, supporting CSMA/CD protocol
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (Full-Duplex)
• High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• 8K MAC address table, automatic source address learning and ageing
• 32Gbps switch fabric, non-blocking switch architecture
• 9K Jumbo Frame support at all speed (10/100/1000Mbps)

Layer 2 Features
• Supports VLANs
　- Port-based VLAN
　- IEEE 802.1Q tag-based VLAN
　- Q-in-Q tunneling
　- Up to 256 VLANs groups, out of 4094 VLAN IDs
• Supports Link Aggregation
　- up to 8 trunk groups
　- up to 8 ports per trunk group with 16Gbps bandwidth (Full Duplex Mode)
　- IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Spanning Tree Protocol
　- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Mini-GBIC module built-in information display
• Cable diagnostics technology and ICMP Ping function
• Link Layer Discovery Protocol (LLDP) for discover basic information about neighboring devices on the local broadcast domain
• Green Networking for energy saving

Quality of Service
• 4 priority queues on all switch ports
• 8 mapping ID to 4 priority queues
• Traffic class assignment based on IEEE 802.1p tag, or DSCP field
• Multicast and Broadcast Storm Control as well as Flooding Control
• Rate Limit bandwidth control at both inband and outband in steps of 128kbps

Multicast
• Supports IGMP Snooping v1 and v2
• Querier mode support
• Multicast Address Table for 256 groups display

Security
• IEEE 802.1X Port-based access control, RADIUS ServerAuthentication
• Source IP filter per port to block unwanted access
• Static MAC Address assign destination MAC address at specified port

Management
• PLANET Smart Discovery Utility
• Switch Management Interface
　- Web switch management
　- SNMP v1, v2c switch management
• Accesses through SNMPv1, v2c and gets requests.
• Firmware upgrade through Web interface
• Configuration upload / download through Web interface
• Supports SNMPv1 with RFC-1213/1573-Interface group, Ethernet MIB
• SNMPv1 Trap 

8-Port 10/100Mbps 802.3at PoE Desktop Switch

RJ-45 Interface
　• 8-Port 10/100Mbps Fast Ethernet
　• 8-Port supports 52V DC power to PoE Powered Device

Power over Ethernet
　• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE
　• Up to 8 IEEE 802.3af / IEEE 802.3at devices powered
　• Supports PoE Power up to 30 watts for each PoE port
　• Auto detect powered device (PD)
　• Circuit protection prevents power interference between each port
　• PoE Usage Alarm LED
　• Remote power feeding up to 100m

Switching
　• Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
　• Flow control for full duplex operation and back pressure for half duplex operation
　• Integrates address look-up engine, supporting 2K absolute MAC addresses
　• Automatic address learning and address aging
　• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

Hardware
　• 12-inch desktop size, 1U height
　• LED indicators for PoE ready, PoE activity and PoE Usage Alarm
　• Fanless design

8-Port 10/100Mbps 802.3at PoE Desktop Switch

RJ-45 Interface
　• 8-Port 10/100Mbps Fast Ethernet
　• 8-Port supports 52V DC power to PoE Powered Device

Power over Ethernet
　• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet End-Span PSE
　• Up to 8 IEEE 802.3af / IEEE 802.3at devices powered
　• Supports PoE Power up to 30 watts for each PoE port
　• Auto detect powered device (PD)
　• Circuit protection prevents power interference between each port
　• PoE Usage Alarm LED
　• Remote power feeding up to 100m

Switching
　• Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X
　• Flow control for full duplex operation and back pressure for half duplex operation
　• Integrates address look-up engine, supporting 2K absolute MAC addresses
　• Automatic address learning and address aging
　• Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)

Hardware
　• 12-inch desktop size, 1U height
　• LED indicators for PoE ready, PoE activity and PoE Usage Alarm
　• Fanless design

8-Port 10/100/1000Mbps Web Smart PoE Switch

Generic Features

• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base- T, IEEE 802.3z Gigabit SX / LX
• 8 10/100/1000Mbps Gigabit Ethernet ports
• 2 mini-GBIC / SFP slots, shared with Port-7 and Port-8
• Each Switching ports support auto-negotiation-10/20, 100/200 and 1000/2000Mbps
• Auto-MDI / MDI-X detection on each RJ-45 port supports CSMA / CD protocol
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• 8K MAC address table, automatic source address learning and ageing
• 16Gbps switch fabric, non-blocking switch architecture
• 9K Jumbo Frame supports all speed (10/100/1000Mbps)

Power Over Ethernet

• Complies with IEEE 802.3af Power over Ethernet standard
• All Copper ports with IEEE 802.3af injector built-in
• Supports 48V DC, 15.4-watts PoE power output to 8 IEEE 802.3af compliant Powered Devices
• Power feeding On / Off and priority configuration
• Power Limit function for PoE power management
• Powered Device Auto Detection
• LED PoE Status Monitoring

Layer-2 Switching

• Supports Port-based and IEEE 802.1Q VLAN function, up to 64 VLAN groups
• IEEE 802.1w Rapid-Spanning Tree protocol supported
• Link Aggregation supports static mode and LACP (IEEE 802.3ad) - up to 4 Trunk groups, each trunk with up to a maximum of 8 ports

Multicast

• IGMP Snooping for multicast filtering, supports v1 and v2
• IGMP Query Mode supports for multimedia application

Quality of Service

• 4 QoS classes per port
• Traffic class assignment based on IEEE 802.1p tag, or DSCP field
• Multicast and Broadcast Storm Control as well as Flooding Control

Security

• Port Mirroring supports dedicated port monitoring
• IEEE 802.1X Port-based access control, RADIUS Server Authentication
• Static MAC Address assigns destination MAC address at specific port

Management

• Remote Web management interface
• Firmware upgrade through Web interface
• Cable Diagnostics technology
• Supports SNMPv1 with RFC-1213 / 1573-Interface group and RMON Group 1 (Statistics)
• SNMP Trap
• Supports PLANET Smart-DISCOVERY Utility for deploy management

24-Port 10/100Mbps PoE Web Smart Ethernet Switch

Physical Port
• 24-Port 10/100Mbps Fast Ethernet ports with PoE Injector
• Reset button for system management

Power over Ethernet
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 24 IEEE 802.3af devices powered
• Supports PoE Power up to 15.4 watts for each 802.3af PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

Layer 2 Features
• Auto-MDI / MDI-X detection on each RJ-45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Supports VLAN:
　–IEEE 802.1Q Tag-based VLAN
　–Port-based VLAN
　–MTU VLAN (Multi-Tenant Unit VLAN)
• Supports Link Aggregation
　–up to 2 trunk groups
　–up to 4 Fast Ethernet ports per trunk group
　–IEEE 802.3ad LACP (Link Aggregation Control Protocol)
• Supports Spanning Tree Protocol
　–STP, IEEE 802.1D (Classic Spanning Tree Protocol)
　–RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
　–Loopback Detection
• Port mirroring to monitor the incoming or outgoing traffic on a particular port

Quality of Service
• 2 priority queues on all switch ports
• Traffic classification:
　–Port-based priority
　–IEEE 802.1p based priority
　–IP TOS / DSCP based priority
　–TCP / UDP Port-based QoS
• Strict priority and Weighted Round Robin (WRR) CoS policies
• In/Out rate limit control on each port
• Broadcast Storm Control support

Multicast
• Supports IGMP Snooping v1 and v2

Security
• MAC address filter
• TCP & UDP filter on each port
• Management idle time security

Management
• Remote Web interface for Switch management and setup
• Supports SNMP v1
• Supports DHCP Option 82 and DHCP Relay
• Firmware upgrade through Web interface
• Configuration upload / download through Web interface
• Reset button for system reboot or reset to factory default

IEEE 802.3at Power over Gigabit Ethernet Extender

• IEEE 802.3at / 802.3af Power over Ethernet compliant
• Complies with IEEE 802.3 / 802.3u / 802.3ab 10/100/1000Base-T
• Extends the range of PoE to more than 100 meters (328ft.)
• Automatically detects and protects PoE equipment from being damaged by incorrect installation
• Multiple units, daisy-chain installation support
• Forwards both Ethernet data and PoE power to the remote device
• No external power cable installation required
• Compact size, wall-mountable design
• Plug and Play

IEEE 802.3af Power Over Ethernet Injector

• Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX
• Provides DC 48V power over RJ-45 Ethernet cable to device with Ethernet port
• LED power input indicators
• Distance up to 100 meters
• Auto-detects POE IEEE 802.3af equipment, protects devices from being damaged by incorrect installation
• Works with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
• EMI standards complies with FCC, CE class B